Why Two Contractors Price the Same Plans Differently
Two contractors can price the same plans very differently — usually because their takeoffs differ. Here is how to tell which number to trust.
New Box Estimating
11/16/20263 min read


Why Two Contractors Price the Same Plans Differently
Hand the same set of plans to two contractors and you will often get two very different numbers back. Same drawings, same specs, same bid date — and a gap big enough to make an owner wonder if someone made a mistake.
Usually nobody made a mistake. The two bids are different because the two takeoffs underneath them are different. The price is only the last step; everything before it decides what that price is.
The plans are the same. The reading of them is not
One takeoff measured everything, the other filled in gaps by feel A plan set always leaves some quantities unstated. One estimator measures every wall, opening, and run from the drawings; another estimates the pieces that are hard to measure. Both bids look complete on the surface, but one is built on measurements and the other on assumptions.
Waste and overlap are counted differently Two estimators can measure the same floor area and still price different amounts of material, because one allowed for cuts, joints, and offcuts and the other priced the net area only. The cheaper number is not always the sharper one — sometimes it is the one that forgot the waste.
Scope assumptions hide in the fine print One bid includes the cleanup, the protection, and the small finish items; the other assumes the owner or another trade covers them. Until someone reads the scope line by line, both bids look like they cover the same work. They do not.
Allowances and exclusions are not the same thing A low number can come from a generous allowance that will grow later, or from an exclusion the owner has not noticed yet. The bid that looks higher may be the one that actually priced the full job.
Different unit costs for the same item Labor rates, supplier pricing, and crew productivity vary from one contractor to another. Two honest estimators can price the same measured quantity differently — and that is normal. The problem is when the quantities themselves differ and nobody can see it.
How to tell which number to trust
Ask for the takeoff, not just the total. A bid you can check is worth more than a bid you have to take on faith. Ask what was measured, how it was measured, and what is included — line by line.
Compare scope before you compare price. Lay the two bids side by side and check what each one actually covers. If one includes items the other left out, the prices were never comparable in the first place.
Look for the missing line items. The gap between two bids is usually hiding in what one of them left out, not in what either of them priced wrong. A missing item costs nothing on bid day and everything later.
Check the quantities against the plans yourself. You do not need to re-measure the whole job. Spot-check a few areas you know well — a floor, a wall run, a roof plane — and see which bid's numbers match the drawings.
Why "measured, not guessed" closes the gap
When every line item in a takeoff can be traced back to the plans, there is nothing left to argue about. The quantities are what the drawings say they are, the scope is written down, and the price follows from that — not from habit, not from a guess, and not from hoping the missing items stay missing.
That is how we build takeoffs at New Box Estimating: plans in, bid-ready Excel out. Every line item measured, not guessed, for residential, commercial, and civil work.
A quick check before you trust any number
Before you pick a bid — or submit one — run through this list:
Can every quantity in the takeoff be traced back to the plans?
Is the waste factor stated, not just assumed?
Does the scope list what is included — and what is not?
Are allowances and exclusions spelled out in plain language?
Would a second person measuring the same plans get the same quantities?
Send us your plans
If two bids came back far apart and you need to know which one is real, send us your plans — PDF, CAD, or photos — and we will turn them into a clear, bid-ready Excel takeoff, measured from the drawings.
DM QUOTE to get started.
New Box Estimating — @nbestimating • www.nbestimating.com
Residential. Commercial. Civil. We estimate it all.
New Box Estimating
Blueprint-to-bid takeoffs in 72 hours.
SITEMAP
Home
Services
About
Contact
GET A QUOTE
new.box@aol.com
Submit blueprints 24/7
72-hour guaranteed turnaround
© 2026 New Box Estimating-
Expert Construction Estimating Services
For Your Building & Construction Needs.
CONSTRUCTION TAKEOFFS
